Prezzo: 20,00€
(Mar 26, 2025 18:30:47 UTC – Dettagli)
Date un’occhiata direttamente nella pagina di Amazon per ulteriori informazioni
The five-in-one controller is a controller that integrates the five functions of dimmer, CCT, RGB, RGBW and RGBCCT and can be switched with the buttons as desired to adapt to the desired functions.
This controller has two buttons, a three-colour (Rgb) display.
The reset button is used to configure network, reset and other functions, and the opt button is used to switch functions. Please refer to the manual (English language not guaranteed).
The different colours of the three-colour LED display correspond to the current function and current status. To give the customer a better experience, the controller also has the ability to set the status and frequency when switched on. Can easily access the ZIGBEE gateway to realise the app voice control.
Compatible with the most important ZigBee gateways on the market, such as Compatible withAmazon Alexa, Hubit at, zigbee controller are Comaptible with SmartThings, Tuya, ConBee / RaspBee.
Dimensioni prodotto : 13 x 5 x 4 cm; 80 grammi
Produttore : Tanshop
ASIN : B07W6VY7T4
Aggiornamenti software garantiti fino a : sconosciuto
LED ZigBee control unit for different types of LED strips such as monochrome, warm white, cold white change, colourful RGB, RGBWW colourful with warm white, RGB+CCT colourful with warm white and cool white. For 12V, 24V, 36V, 48V and 54V.
The maximum brightness of the product is increased by the reset button. Press and hold the reset button for more than 5 seconds or turn it on again more than 5 times (including five times), and the device will be reset and all data will be deleted, including Zigbee network, RF remote control. The data of the device will reset all states to factory settings and delete is successful.
Compatible with all stripes with 12 V or 24 V and common anode. With a maximum of 15 amps and 6 A per channel, stripes can be connected with up to 60 m (depending on the strip used).
Short press the “Opt” button to switch between different modes and identify the currently accessible light strip on the colour of the indicator light (connect white RGBCCT -> connect yellow RGBW -> connect blue RGB -> connect green CCT -> connect red with dimmer)
The PWM frequency can be selected and the power status is set to turn the light on and off
With the 5-in-1 controller, you can adjust the PWM frequency, which can prevent flickering on mobile phones or also prevent feeling of power supplies. The switch-on behaviour on the controller can also be set.
It can be controlled by RF remote control, dimming and colour saturation, etc.
Please don’t hesitate to contact us firstly if have any questions.
